Product Overview
Frame Dimensions 24" x 34" x 3/4" Round Rod, brace is approx 12" from bottom of frame.
Target face, stem and eye all cut out together, one piece no welds to break.
Target legs can be placed in a pipe driven into the ground if shot at the same location this will allow for easy setup and removal.
Also holes can be drilled into a couple of 4" x 4" boards to place the targets legs into.
General Disclaimers:
Buyer assumes all responsibility for the use and misuse of the targets purchased.
SAFETY RULES FOR SHOOTING STEEL TARGETS:
General Warnings and Disclaimer:
1. Always Keep The Muzzle Pointed In A Safe Direction.
2. Don't Rely On Your Guns Safety.
3. Be Sure Of Your Target and What's Beyond It.
4. Use Correct Ammunition.
5. Do not fire high powered rifles at targets closer than 100 yards.
6. Do not fire small bore guns at targets closer than 40 yards.
7. Minimum recommended distance with a handgun and standard lead ammunition is 15 yards.
8. Do not fire air guns at targets closer than 12 yards.
9. Always wear wrap-around eye protection and proper hearing protection.
10. Discontinue use of target if it becomes disfigured, deformed, or damaged in any way.
11. Never ever use armor-piercing, steel-core, or other hardened ammunition.
12. Never ever use steel shot, pellets, BBs.
13. Never use ammunition that exceeds the targets scope of design.
14. Always use high quality steel targets specifically designed for heavy duty use.
15. Never use steel targets for purposes outside their scope of design.
Email us at sales@qualitytargets.com
Quality Targets
204 E Through St
Iola, Illinois 62838
Phone: 618-245-6515